Flotation Spare Parts Flotation machine stator
About the polyurethane:
Polyurethaneis a new type of polymer composite material and belongs to high-tech products,its nature between plastic and rubber
but its performance is much better than the two, is an ideal material to replace them.
Our factory synthesize the raw material- - polyurethane to ensure the features of polyurethane, to get quality products for our
clients !
Extended wear life , corrosion-resistance ,tear-resistance , Acid and alkali-resistante
Introduction of our flotation impeller rotor and stator:
1.When the pulp is push out by impeller, form a negative pressure suction under the coverplate;
2.Regulate the amount of pulp into the impeller;
3.Avoid during downtime, ore pressure impeller and difficult to start;
4.Some steady flow function.When flotation machine work,the feedtube feed the slurry
to the center of coverplate,the impeller rotating centrifugal forcegenerated the pulpout,
at the same time form a negative pressure between the impeller and the cover plate,
and the intake pipe automatically inhale the outside air.
5.Strong stirring impeller functionmake the pulp is mixed with air fully, and will be dividedinto many small bubbles.Moreover, in
the rear of the impeller blade will precipitate some air bubbles from the pulp.
our flotation impeller rotor and stator Advantages:
Product has wear resisting, corrosion resistance, oil resistance, water resistance, acid resistance,
light weight, the characteristics of rubber impeller, replace, substitute products cover plate and
the sheath.
Function of our flotation impeller rotor and stator:
1.When the pulp is push out by impeller, form a negative pressure suction under the coverplate;
2. Regulate the amount of pulp into the impeller;
3. Avoid during downtime, ore pressure impeller and difficult to start;
4. Some steady flow function. When flotation machine work, the feed tube feed the slurry to the center of coverplate, the impeller
rotating centrifugal force generated the pulp out, at the same time form a negative pressure between the impeller and the cover
plate, and the intake pipe automatically inhale the outside air. Strong stirring impeller function make the pulp is mixed with air
fully, and will be divided into many small bubbles.Moreover, in the rear of the impeller blade will precipitate some air bubbles
from the pulp.
Application of Flotation machine stator::
Flotation is a selective process and can be used to achieve specific separations from complex ores such as lead-zinc, copper-zinc,
etc. Initially developed to treat the sulphides of copper, lead, and zinc, the field of flotation has now expanded to include the
oxidized minerals, non-metallic ores and fine coal.
